Versitron MCC-16RM Guia de Instalação descarregar pdf (Página 28)

28 www.versitron.com

Chapter 5

SNMP Management

SNMP management is performed at a network management station running SNMP network management

application manager software with graphical user interface. The following figure illustrates an example model:

The system unit serves as an SNMP agent and provides the capabilities that allows network administrators via

SNMP protocol to set parameters and view system status and media converter status defined in the standard MIB-

II and private MIB.

5.1 Configuring SNMP Settings via Console Operation

Before performing SNMP operation, proper SNMP settings must be configured in the system unit. The SNMP

related settings are:

Name Login name to identify a specific system unit

Location Location where the system is installed

Contact Contact person regarding the system

Community SNMP communities to which the system belongs and access rights to the system (read

only or read/write)

Trap hosts IP addresses of trap hosts to which a trap is issued and the trap community to which the

system belongs

Up to four SNMP communities and up to three trap hosts are supported by the system SNMP agent.

These settings can be configured through console or telnet operation. Refer to Chapter 4 for more information.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 46 47

Sem comentários

Versitron MCC-16RM Guia de Instalação Página 28